STAPLES
A complete range of industrial staples that fit in any staplers available on the market and for all applications.
Length: from 5/32" (3,9 mm) to 5" (130 mm)
Crown: from 5/32" (3,9 mm) to 1" (25 mm)
Gauge: from 21 (0,6 mm) to 14 (2,2 mm)
Finish: EG, EG 12, Stainless Steel
WIRE COIL NAILS
All that you need in wire collation for industrial applications, construction and roofing.
Diameter: from .083 (2,1 mm) to .142 (3,8 mm)
Length: from 1" (25 mm) to 5" (130 mm)
Finish: Bright, EG, EG 12, HDG 50, Stainless Steel
Standard Coils, Jumbo Coils and High Load Coils, are available along with wire collated Hardened knurled nails for metal to wood or metal to metal applications.
LOOSE NAILS
A full line of Construction Nails is available including, among others :
Square Nails – Square Grooved Nails – Double Head Nails – Roofing Nails – Dry Wall Nails – Finish Nails
Finish: Bright, EG, EG 12, HDG 50
Machine Quality Nails (1018 and 1030 grade) complete this family of products.
PINS, BRADS, FINISH AND T NAILS
A selection of fasteners for the best finishing job.
Headless pins: from 23ga (0,6 mm) to 18ga (1,2 mm)
Finish and T Nails: from 23ga (0,6 mm) to 14ga (2,2 mm)
Head size: from 1/32" (0,9 mm) to 17/64" (6,5 mm)
Finish: EG, EG 12, Stainless Steel, Heat Treated
PLASTIC CARRIER COIL NAILS
Available in various diameters and lengths.
Inclination: straight (0°) and 16°
Finish: Bright, EG, HDG 50, Stainless Steel
Hardened knurled nails for metal to wood or metal to metal applications are included in this product family.
COLLATED SCREWS
We are now offering Collated screws with various threads, heads and finishes, in plastic strips, wire collation and our branded TruScrew® product line.
New additions to this product family will soon be available.
INCLINED FINISH NAILS
In addition to the well known DA finish nails, a complete assortment of inclined brads.
Gauge: from 18 (1,2 mm) to 15 (1,8 mm)
Inclination: 20°- 25°- 26°- 34°
Length: from 5/8" (15 mm) to 2-1/2" (65 mm)
Finish: EG, EG 12, Stainless Steel
PLASTIC & PAPER COLLATED STRIP NAILS
The most complete range available from a single manufacturer
Head: Clipped, Offset, Full Round
Finish: Bright, EG, EG 12, HDG 50, Stainless Steel
Inclination: 17° - 21° - 28° - 34°
Diameter: from .099 (2,5 mm) to .168 (4,2 mm)
Length: from 2" (50 mm) to 6" (160 mm)
AIR DRIVEN TOOLS
A basic range of Staplers, Headless Pinners, Bradders, Finish Nailers, Framing Nailers and Wire Coil Nailers is available to support the business of our Commercial Partners. Our tool line is colour coded to clearly identify the correct fastener to be used.
CARTON CLOSING STAPLES AND TOOLS
Stick staples: "A" (35), "C" (32), SW 7437 and 9040
1M Roll Staples: AR – CR – SWC – LBS
4M Roll Staples: SWC
5M Roll Staples: AR – CR
Finish: EG, Copper
Together with Hand and Air Driven Carton Staplers for stick staples, Air Driven Tools for 1M Roll Staples plus a full range of Mechanical and Air Driven Bottom Staplers are available.
SPECIAL FASTENERS
Various special fasteners to complete our range:
Cleat Nails
Corrugated Fasteners
Hog Rings
Concrete Pins
Long staples up to 6"
GAS NAILERS AND FUEL CELLS
Framing Nailers and Concrete Pinners are available together with the full range of Fuel Cells for the most reputable Gas Nailers on the International market:
Red type
Orange type
Yellow type
Blue type
Gray type